DDR爱好者之家 Design By 杰米

1.安装ssm

[root@localhost ~]# yum -y install system-storage-manager.noarch

2.检查硬盘和LVM信息

[root@localhost ~]# sudo ssm list
---------------------------------------------------------//物理设备
Device    Free   Used   Total Pool Mount point
---------------------------------------------------------
/dev/sda           50.00 GB    PARTITIONED
/dev/sda1          500.00 MB    /boot   
/dev/sda2           2.02 GB    SWAP   
/dev/sda3           47.50 GB    /     
/dev/sdb  4.00 GB 1.00 GB  5.00 GB vg00      
/dev/sdc  5.00 GB 0.00 KB  5.00 GB vg00      
/dev/sdd            5.00 GB         
/dev/sde            5.00 GB         
---------------------------------------------------------
----------------------------------------------//存储池
Pool Type Devices   Free   Used  Total 
----------------------------------------------
vg00 lvm  2    8.99 GB 1.00 GB 9.99 GB 
----------------------------------------------
----------------------------------------------------------------------------------//存储池中的LVM卷
Volume     Pool Volume size FS   FS size    Free Type  Mount point
----------------------------------------------------------------------------------
/dev/vg00/lv00 vg00   1.00 GB ext2  1.00 GB 957.62 MB linear      
/dev/sda1        500.00 MB xfs  496.67 MB 406.23 MB part  /boot   
/dev/sda3        47.50 GB xfs  47.47 GB  43.87 GB part  /     
----------------------------------------------------------------------------------

3.将物理磁盘添加到LVM池中

[root@localhost ~]# ssm add -p vg00 /dev/sdd
 Physical volume "/dev/sdd" successfully created
 Volume group "vg00" successfully extended

4.查看当前存储池

[root@localhost ~]# ssm list
---------------------------------------------------------
Device    Free   Used   Total Pool Mount point
---------------------------------------------------------
/dev/sda           50.00 GB    PARTITIONED
/dev/sda1          500.00 MB    /boot   
/dev/sda2           2.02 GB    SWAP   
/dev/sda3           47.50 GB    /     
/dev/sdb  4.00 GB 1.00 GB  5.00 GB vg00      
/dev/sdc  5.00 GB 0.00 KB  5.00 GB vg00      
/dev/sdd  5.00 GB 0.00 KB  5.00 GB vg00      
/dev/sde            5.00 GB         
---------------------------------------------------------
------------------------------------------------
Pool Type Devices   Free   Used   Total 
------------------------------------------------
vg00 lvm  3    13.99 GB 1.00 GB 14.99 GB 
------------------------------------------------
----------------------------------------------------------------------------------
Volume     Pool Volume size FS   FS size    Free Type  Mount point
----------------------------------------------------------------------------------
/dev/vg00/lv00 vg00   1.00 GB ext2  1.00 GB 957.62 MB linear      
/dev/sda1        500.00 MB xfs  496.67 MB 406.23 MB part  /boot   
/dev/sda3        47.50 GB xfs  47.47 GB  43.87 GB part  /     
----------------------------------------------------------------------------------

5.扩大LVM卷

[root@localhost ~]# ssm resize -s +10G /dev/vg00/lv00
fsck,来自 util-linux 2.23.2
/dev/mapper/vg00-lv00: 11/65536 files (0.0% non-contiguous), 4763/262144 blocks
 Extending logical volume lv00 to 11.00 GiB
 Logical volume lv00 successfully resized
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on /dev/mapper/vg00-lv00 to 2883584 (4k) blocks.
The filesystem on /dev/mapper/vg00-lv00 is now 2883584 blocks long.

6.查看结果

 

[root@localhost ~]# ssm list
---------------------------------------------------------
Device    Free   Used   Total Pool Mount point
---------------------------------------------------------
/dev/sda           50.00 GB    PARTITIONED
/dev/sda1          500.00 MB    /boot   
/dev/sda2           2.02 GB    SWAP   
/dev/sda3           47.50 GB    /     
/dev/sdb  0.00 KB 5.00 GB  5.00 GB vg00      
/dev/sdc  0.00 KB 5.00 GB  5.00 GB vg00      
/dev/sdd  3.99 GB 1.01 GB  5.00 GB vg00      
/dev/sde            5.00 GB         
---------------------------------------------------------
------------------------------------------------
Pool Type Devices   Free   Used   Total 
------------------------------------------------
vg00 lvm  3    3.99 GB 11.00 GB 14.99 GB 
------------------------------------------------
----------------------------------------------------------------------------------
Volume     Pool Volume size FS   FS size    Free Type  Mount point
----------------------------------------------------------------------------------
/dev/vg00/lv00 vg00   11.00 GB ext2  11.00 GB  10.31 GB linear      
/dev/sda1        500.00 MB xfs  496.67 MB 406.23 MB part  /boot   
/dev/sda3        47.50 GB xfs  47.47 GB  43.87 GB part  /     
----------------------------------------------------------------------------------

7.更新文件系统

[root@localhost ~]# mke2fs /dev/vg00/lv00

8.挂载结果

[root@localhost ~]# df -hT
文件系统       类型   容量 已用 可用 已用% 挂载点
/dev/sda3       xfs    48G 3.6G  44G  8% /
devtmpfs       devtmpfs 906M   0 906M  0% /dev
tmpfs         tmpfs   914M  80K 914M  1% /dev/shm
tmpfs         tmpfs   914M 8.9M 905M  1% /run
tmpfs         tmpfs   914M   0 914M  0% /sys/fs/cgroup
/dev/sda1       xfs    497M 116M 382M  24% /boot
/dev/mapper/vg00-lv00 ext2    11G 5.0M  11G  1% /mnt

9.创建新的LVM池

[root@localhost ~]# mkdir /soft
[root@localhost ~]# ssm create -s 1G -n soft --fstype xfs -p mysoft /dev/sde /soft  
//create创建、-s 1G指定大小、-n soft文件名称、--fstype xfs文件系统、-p mysoft指定存储池名称、/dev/sde /soft指定那块磁盘挂载哪个目录上
 Physical volume "/dev/sde" successfully created
 Volume group "mysoft" successfully created
 Logical volume "soft" created
meta-data=/dev/mysoft/soft    isize=256  agcount=4, agsize=65536 blks
     =            sectsz=512  attr=2, projid32bit=1
     =            crc=0
data   =            bsize=4096  blocks=262144, imaxpct=25
     =            sunit=0   swidth=0 blks
naming  =version 2       bsize=4096  ascii-ci=0 ftype=0
log   =internal log      bsize=4096  blocks=2560, version=2
     =            sectsz=512  sunit=0 blks, lazy-count=1
realtime =none          extsz=4096  blocks=0, rtextents=0

10.查看结果

[root@localhost ~]# ssm list
-----------------------------------------------------------
Device    Free   Used   Total Pool  Mount point
-----------------------------------------------------------
/dev/sda           50.00 GB     PARTITIONED
/dev/sda1          500.00 MB     /boot   
/dev/sda2           2.02 GB     SWAP   
/dev/sda3           47.50 GB     /     
/dev/sdb  0.00 KB 5.00 GB  5.00 GB vg00       
/dev/sdc  0.00 KB 5.00 GB  5.00 GB vg00       
/dev/sdd  3.99 GB 1.01 GB  5.00 GB vg00       
/dev/sde  4.00 GB 1.00 GB  5.00 GB mysoft      
-----------------------------------------------------------
--------------------------------------------------
Pool  Type Devices   Free   Used   Total 
--------------------------------------------------
mysoft lvm  1    4.00 GB  1.00 GB  5.00 GB 
vg00  lvm  3    3.99 GB 11.00 GB 14.99 GB 
--------------------------------------------------
----------------------------------------------------------------------------------------
Volume      Pool  Volume size FS    FS size    Free Type  Mount point
----------------------------------------------------------------------------------------
/dev/vg00/lv00  vg00    11.00 GB ext2  11.00 GB  10.31 GB linear /mnt   
/dev/mysoft/soft mysoft   1.00 GB xfs  1014.00 MB 1013.88 MB linear /soft   
/dev/sda1          500.00 MB xfs  496.67 MB  406.23 MB part  /boot   
/dev/sda3          47.50 GB xfs   47.47 GB  43.87 GB part  /     
----------------------------------------------------------------------------------------

11.对LVM卷快照

 

[root@localhost ~]# ssm snapshot /dev/mysoft/soft
 Rounding up size to full physical extent 208.00 MiB
 Logical volume "snap20160531T120543" created
[root@localhost ~]# ssm list snapshots
------------------------------------------------------------------------------
Snapshot             Origin Pool  Volume size   Size Type 
------------------------------------------------------------------------------
/dev/mysoft/snap20160531T120543 soft  mysoft  208.00 MB 21.30 KB linear
------------------------------------------------------------------------------

 12.删除LVM卷

[root@localhost ~]# ssm remove /dev/mysoft/soft
Device '/dev/mysoft/soft' is mounted on '/soft' Unmount (N/y/q) "snap20160531T120543" successfully removed
Do you really want to remove active logical volume soft"soft" successfully removed

13.查看结果

[root@localhost ~]# ssm list
-----------------------------------------------------------
Device    Free   Used   Total Pool  Mount point
-----------------------------------------------------------
/dev/sda           50.00 GB     PARTITIONED
/dev/sda1          500.00 MB     /boot   
/dev/sda2           2.02 GB     SWAP   
/dev/sda3           47.50 GB     /     
/dev/sdb  0.00 KB 5.00 GB  5.00 GB vg00       
/dev/sdc  0.00 KB 5.00 GB  5.00 GB vg00       
/dev/sdd  3.99 GB 1.01 GB  5.00 GB vg00       
/dev/sde  5.00 GB 0.00 KB  5.00 GB mysoft      
-----------------------------------------------------------
--------------------------------------------------
Pool  Type Devices   Free   Used   Total 
--------------------------------------------------
mysoft lvm  1    5.00 GB  0.00 KB  5.00 GB 
vg00  lvm  3    3.99 GB 11.00 GB 14.99 GB 
--------------------------------------------------
----------------------------------------------------------------------------------
Volume     Pool Volume size FS   FS size    Free Type  Mount point
----------------------------------------------------------------------------------
/dev/vg00/lv00 vg00   11.00 GB ext2  11.00 GB  10.31 GB linear /mnt   
/dev/sda1        500.00 MB xfs  496.67 MB 406.23 MB part  /boot   
/dev/sda3        47.50 GB xfs  47.47 GB  43.87 GB part  /     
----------------------------------------------------------------------------------

14.删除存储池

[root@localhost ~]# ssm remove mysoft
 Volume group "mysoft" successfully removed

15.查看结果

[root@localhost ~]# ssm list
---------------------------------------------------------
Device    Free   Used   Total Pool Mount point
---------------------------------------------------------
/dev/sda           50.00 GB    PARTITIONED
/dev/sda1          500.00 MB    /boot   
/dev/sda2           2.02 GB    SWAP   
/dev/sda3           47.50 GB    /     
/dev/sdb  0.00 KB 5.00 GB  5.00 GB vg00      
/dev/sdc  0.00 KB 5.00 GB  5.00 GB vg00      
/dev/sdd  3.99 GB 1.01 GB  5.00 GB vg00      
/dev/sde            5.00 GB         
---------------------------------------------------------
------------------------------------------------
Pool Type Devices   Free   Used   Total 
------------------------------------------------
vg00 lvm  3    3.99 GB 11.00 GB 14.99 GB 
------------------------------------------------
----------------------------------------------------------------------------------
Volume     Pool Volume size FS   FS size    Free Type  Mount point
----------------------------------------------------------------------------------
/dev/vg00/lv00 vg00   11.00 GB ext2  11.00 GB  10.31 GB linear /mnt   
/dev/sda1        500.00 MB xfs  496.67 MB 406.23 MB part  /boot   
/dev/sda3        47.50 GB xfs  47.47 GB  43.87 GB part  /     
----------------------------------------------------------------------------------

以上就是小编为大家带来的RHEL7使用ssm命令管理LVM的方法全部内容了,希望大家多多支持~

DDR爱好者之家 Design By 杰米
广告合作:本站广告合作请联系QQ:858582 申请时备注:广告合作(否则不回)
免责声明:本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除!
DDR爱好者之家 Design By 杰米

《魔兽世界》大逃杀!60人新游玩模式《强袭风暴》3月21日上线

暴雪近日发布了《魔兽世界》10.2.6 更新内容,新游玩模式《强袭风暴》即将于3月21 日在亚服上线,届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。

艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕,并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时,他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中,玩家将会进入一个全新的海盗主题大逃杀式限时活动,其中包含极高的风险和史诗级的奖励。

《强袭风暴》不是普通的战场,作为一个独立于主游戏之外的活动,玩家可以用大逃杀的风格来体验《魔兽世界》,不分职业、不分装备(除了你在赛局中捡到的),光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式,玩家在加入海盗主题的预赛大厅区域前,可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹,《巨龙崛起》和《魔兽世界:巫妖王之怒 经典版》的玩家都可以获得奖励。