DDR爱好者之家

使用Kubeadm在CentOS7.2上部署Kubernetes集群的方法
站长资源 2024/11/24 佚名
60 1538
DDR爱好者之家 Design By 杰米

本文参考kubernetes官网文章Installing Kubernetes on Linux with kubeadm在CentOS7.2使用Kubeadm部署Kuebernetes集群，解决了一些在按照该文档部署时遇到的问题。

操作系统版本

# cat /etc/redhat-release 
CentOS Linux release 7.2.1511 (Core)

内核版本

# uname -r
3.10.0-327.el7.x86_64

集群节点

192.168.120.122 kube-master
192.168.120.123 kube-agent1
192.168.120.124 kube-agent2
192.168.120.125 kube-agent3

即该集群包含一个控制节点和三个工作节点。

部署前的准备

配置可以访问google相关网站

这种部署方式使用的软件包由google相关源提供，因此集群节点必须能够访问外网，至于如何配置请自行解决。

关闭防火墙

# systemctl stop firewalld.service && systemctl disable firewalld.service

禁用SELinux

# setenforce 0
# sed -i.bak 's/SELINUX=enforcing/SELINUX=permissive/' /etc/selinux/config

配置yum源

# cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg
    https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
EOF

安装kubelet和kubeadm

在所有节点上安装以下软件包：

# yum install -y docker kubelet kubeadm kubectl kubernetes-cni
# systemctl enable docker && systemctl start docker
# systemctl enable kubelet && systemctl start kubelet

然后设置内核参数：

# sysctl net.bridge.bridge-nf-call-iptables=1
# sysctl net.bridge.bridge-nf-call-ip6tables=1

初始化控制节点

# kubeadm init --pod-network-cidr=10.244.0.0/16

因为在该集群中将使用flannel搭建pod网络，因此必须添加–pod-network-cidr参数。

注意：初始化较慢，因为该过程会pull一些docker image。

该命令的输出如下：

Initializing your master...
[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters.
[init] Using Kubernetes version: v1.6.4
[init] Using Authorization mode: RBAC
[preflight] Running pre-flight checks
[certificates] Generated CA certificate and key.
[certificates] Generated API server certificate and key.
[certificates] API Server serving cert is signed for DNS names [kube-master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.120.122]
[certificates] Generated API server kubelet client certificate and key.
[certificates] Generated service account token signing key and public key.
[certificates] Generated front-proxy CA certificate and key.
[certificates] Generated front-proxy client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[apiclient] Created API client, waiting for the control plane to become ready
[apiclient] All control plane components are healthy after 1377.560339 seconds
[apiclient] Waiting for at least one node to register
[apiclient] First node has registered after 6.039626 seconds
[token] Using token: 60bc68.e94800f3c5c4c2d5
[apiconfig] Created RBAC rules
[addons] Created essential addon: kube-proxy
[addons] Created essential addon: kube-dns

Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run (as a regular user):

 sudo cp /etc/kubernetes/admin.conf $HOME/
 sudo chown $(id -u):$(id -g) $HOME/admin.conf
 export KUBECONFIG=$HOME/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at: http://kubernetes.io/docs/admin/addons/

You can now join any number of machines by running the following on each node as root:

 kubeadm join --token <token> 192.168.120.122:6443

观察控制节点的docker image：

# docker images
REPOSITORY                        TAG         IMAGE ID      CREATED       SIZE
gcr.io/google_containers/kube-apiserver-amd64      v1.6.4       4e3810a19a64    2 days ago     150.6 MB
gcr.io/google_containers/kube-controller-manager-amd64  v1.6.4       0ea16a85ac34    2 days ago     132.8 MB
gcr.io/google_containers/kube-proxy-amd64        v1.6.4       e073a55c288b    2 days ago     109.2 MB
gcr.io/google_containers/kube-scheduler-amd64      v1.6.4       1fab9be555e1    2 days ago     76.75 MB
gcr.io/google_containers/etcd-amd64           3.0.17       243830dae7dd    12 weeks ago    168.9 MB
gcr.io/google_containers/pause-amd64           3.0         99e59f495ffa    12 months ago    746.9 kB

按照初始化命令的提示执行以下操作：

# cp /etc/kubernetes/admin.conf $HOME/
# chown $(id -u):$(id -g) $HOME/admin.conf
# export KUBECONFIG=$HOME/admin.conf

隔离控制节点

# kubectl taint nodes --all node-role.kubernetes.io/master-
node "kube-master" tainted

安装pod网络

# kubectl apply -f flannel/Documentation/kube-flannel-rbac.yml
clusterrole "flannel" created
clusterrolebinding "flannel" created

# kubectl apply -f flannel/Documentation/kube-flannel.yml
serviceaccount "flannel" created
configmap "kube-flannel-cfg" created
daemonset "kube-flannel-ds" created

可以通过git clone flannel仓库：

# git clone https://github.com/coreos/flannel.git

添加工作节点

# kubeadm join --token <token> 192.168.120.122:6443

该操作输出如下：

[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters.
[preflight] Running pre-flight checks
[discovery] Trying to connect to API Server "192.168.120.122:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://192.168.120.122:6443"
[discovery] Cluster info signature and contents are valid, will use API Server "https://192.168.120.122:6443"
[discovery] Successfully established connection with API Server "192.168.120.122:6443"
[bootstrap] Detected server version: v1.6.4
[bootstrap] The server supports the Certificates API (certificates.k8s.io/v1beta1)
[csr] Created API client to obtain unique certificate for this node, generating keys and certificate signing request
[csr] Received signed certificate from the API server, generating KubeConfig...
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"

Node join complete:
* Certificate signing request sent to master and response
 received.
* Kubelet informed of new secure connection details.

Run 'kubectl get nodes' on the master to see this machine join.

在控制节点观察集群状态

# kubectl get nodes
NAME     STATUS  AGE    VERSION
kube-agent1  Ready   16m    v1.6.3
kube-agent2  Ready   16m    v1.6.3
kube-agent3  Ready   16m    v1.6.3
kube-master  Ready   37m    v1.6.3

# kubectl get pods --all-namespaces -o wide
NAMESPACE   NAME                 READY   STATUS  RESTARTS  AGE    IP        NODE
kube-system  etcd-kube-master           1/1    Running  0     32m    192.168.120.122  kube-master
kube-system  kube-apiserver-kube-master      1/1    Running  7     32m    192.168.120.122  kube-master
kube-system  kube-controller-manager-kube-master  1/1    Running  0     32m    192.168.120.122  kube-master
kube-system  kube-dns-3913472980-3x9wh       3/3    Running  0     37m    10.244.0.2    kube-master
kube-system  kube-flannel-ds-1m4wz         2/2    Running  0     18m    192.168.120.122  kube-master
kube-system  kube-flannel-ds-3jwf5         2/2    Running  0     17m    192.168.120.123  kube-agent1
kube-system  kube-flannel-ds-41qbs         2/2    Running  4     17m    192.168.120.125  kube-agent3
kube-system  kube-flannel-ds-ssjct         2/2    Running  4     17m    192.168.120.124  kube-agent2
kube-system  kube-proxy-0mmfc           1/1    Running  0     17m    192.168.120.124  kube-agent2
kube-system  kube-proxy-23vwr           1/1    Running  0     17m    192.168.120.125  kube-agent3
kube-system  kube-proxy-5q8vq           1/1    Running  0     17m    192.168.120.123  kube-agent1
kube-system  kube-proxy-8srwn           1/1    Running  0     37m    192.168.120.122  kube-master
kube-system  kube-scheduler-kube-master      1/1    Running  0     32m    192.168.120.122  kube-master

至此，完成Kubernetes集群的部署。

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持。

DDR爱好者之家 Design By 杰米
广告合作：本站广告合作请联系QQ：858582 申请时备注：广告合作（否则不回）
免责声明：本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除！
DDR爱好者之家 Design By 杰米
ddrfans.com DDR爱好者之家
8,675无损音乐
1,324高清电影
213破解软件
70,141收录资讯

《魔兽世界》大逃杀！60人新游玩模式《强袭风暴》3月21日上线

暴雪近日发布了《魔兽世界》10.2.6 更新内容，新游玩模式《强袭风暴》即将于3月21 日在亚服上线，届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。

艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕，并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时，他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中，玩家将会进入一个全新的海盗主题大逃杀式限时活动，其中包含极高的风险和史诗级的奖励。

《强袭风暴》不是普通的战场，作为一个独立于主游戏之外的活动，玩家可以用大逃杀的风格来体验《魔兽世界》，不分职业、不分装备（除了你在赛局中捡到的），光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式，玩家在加入海盗主题的预赛大厅区域前，可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹，《巨龙崛起》和《魔兽世界：巫妖王之怒 经典版》的玩家都可以获得奖励。

更新日志

友情链接

杰晶网络 DDR爱好者之家 南强小屋 黑松山资源网 白云城资源网
DDR爱好者之家 Design By 杰米