DDR爱好者之家 Design By 杰米
练手项目，先上图
先实现一个简单的串口工具，为之后的上位机做准备
代码如下：
github 下载地址
pyserial_demo.py
import sys
import serial
import serial.tools.list_ports
from PyQt5 import QtWidgets
from PyQt5.QtWidgets import QMessageBox
from PyQt5.QtCore import QTimer
from ui_demo_1 import Ui_Form
class Pyqt5_Serial(QtWidgets.QWidget, Ui_Form):
def __init__(self):
super(Pyqt5_Serial, self).__init__()
self.setupUi(self)
self.init()
self.setWindowTitle("串口小助手")
self.ser = serial.Serial()
self.port_check()
# 接收数据和发送数据数目置零
self.data_num_received = 0
self.lineEdit.setText(str(self.data_num_received))
self.data_num_sended = 0
self.lineEdit_2.setText(str(self.data_num_sended))
def init(self):
# 串口检测按钮
self.s1__box_1.clicked.connect(self.port_check)
# 串口信息显示
self.s1__box_2.currentTextChanged.connect(self.port_imf)
# 打开串口按钮
self.open_button.clicked.connect(self.port_open)
# 关闭串口按钮
self.close_button.clicked.connect(self.port_close)
# 发送数据按钮
self.s3__send_button.clicked.connect(self.data_send)
# 定时发送数据
self.timer_send = QTimer()
self.timer_send.timeout.connect(self.data_send)
self.timer_send_cb.stateChanged.connect(self.data_send_timer)
# 定时器接收数据
self.timer = QTimer(self)
self.timer.timeout.connect(self.data_receive)
# 清除发送窗口
self.s3__clear_button.clicked.connect(self.send_data_clear)
# 清除接收窗口
self.s2__clear_button.clicked.connect(self.receive_data_clear)
# 串口检测
def port_check(self):
# 检测所有存在的串口，将信息存储在字典中
self.Com_Dict = {}
port_list = list(serial.tools.list_ports.comports())
self.s1__box_2.clear()
for port in port_list:
self.Com_Dict["%s" % port[0]] = "%s" % port[1]
self.s1__box_2.addItem(port[0])
if len(self.Com_Dict) == 0:
self.state_label.setText(" 无串口")
# 串口信息
def port_imf(self):
# 显示选定的串口的详细信息
imf_s = self.s1__box_2.currentText()
if imf_s != "":
self.state_label.setText(self.Com_Dict[self.s1__box_2.currentText()])
# 打开串口
def port_open(self):
self.ser.port = self.s1__box_2.currentText()
self.ser.baudrate = int(self.s1__box_3.currentText())
self.ser.bytesize = int(self.s1__box_4.currentText())
self.ser.stopbits = int(self.s1__box_6.currentText())
self.ser.parity = self.s1__box_5.currentText()
try:
self.ser.open()
except:
QMessageBox.critical(self, "Port Error", "此串口不能被打开！")
return None
# 打开串口接收定时器，周期为2ms
self.timer.start(2)
if self.ser.isOpen():
self.open_button.setEnabled(False)
self.close_button.setEnabled(True)
self.formGroupBox1.setTitle("串口状态（已开启）")
# 关闭串口
def port_close(self):
self.timer.stop()
self.timer_send.stop()
try:
self.ser.close()
except:
pass
self.open_button.setEnabled(True)
self.close_button.setEnabled(False)
self.lineEdit_3.setEnabled(True)
# 接收数据和发送数据数目置零
self.data_num_received = 0
self.lineEdit.setText(str(self.data_num_received))
self.data_num_sended = 0
self.lineEdit_2.setText(str(self.data_num_sended))
self.formGroupBox1.setTitle("串口状态（已关闭）")
# 发送数据
def data_send(self):
if self.ser.isOpen():
input_s = self.s3__send_text.toPlainText()
if input_s != "":
# 非空字符串
if self.hex_send.isChecked():
# hex发送
input_s = input_s.strip()
send_list = []
while input_s != '':
try:
num = int(input_s[0:2], 16)
except ValueError:
QMessageBox.critical(self, 'wrong data', '请输入十六进制数据，以空格分开!')
return None
input_s = input_s[2:].strip()
send_list.append(num)
input_s = bytes(send_list)
else:
# ascii发送
input_s = (input_s + '\r\n').encode('utf-8')
num = self.ser.write(input_s)
self.data_num_sended += num
self.lineEdit_2.setText(str(self.data_num_sended))
else:
pass
# 接收数据
def data_receive(self):
try:
num = self.ser.inWaiting()
except:
self.port_close()
return None
if num > 0:
data = self.ser.read(num)
num = len(data)
# hex显示
if self.hex_receive.checkState():
out_s = ''
for i in range(0, len(data)):
out_s = out_s + '{:02X}'.format(data[i]) + ' '
self.s2__receive_text.insertPlainText(out_s)
else:
# 串口接收到的字符串为b'123',要转化成unicode字符串才能输出到窗口中去
self.s2__receive_text.insertPlainText(data.decode('iso-8859-1'))
# 统计接收字符的数量
self.data_num_received += num
self.lineEdit.setText(str(self.data_num_received))
# 获取到text光标
textCursor = self.s2__receive_text.textCursor()
# 滚动到底部
textCursor.movePosition(textCursor.End)
# 设置光标到text中去
self.s2__receive_text.setTextCursor(textCursor)
else:
pass
# 定时发送数据
def data_send_timer(self):
if self.timer_send_cb.isChecked():
self.timer_send.start(int(self.lineEdit_3.text()))
self.lineEdit_3.setEnabled(False)
else:
self.timer_send.stop()
self.lineEdit_3.setEnabled(True)
# 清除显示
def send_data_clear(self):
self.s3__send_text.setText("")
def receive_data_clear(self):
self.s2__receive_text.setText("")
if __name__ == '__main__':
app = QtWidgets.QApplication(sys.argv)
myshow = Pyqt5_Serial()
myshow.show()
sys.exit(app.exec_())
ui_demo_1.py
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'demo_1.ui'
#
# Created by: PyQt5 UI code generator 5.6
#
# WARNING! All changes made in this file will be lost!
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_Form(object):
def setupUi(self, Form):
Form.setObjectName("Form")
Form.resize(707, 458)
self.formGroupBox = QtWidgets.QGroupBox(Form)
self.formGroupBox.setGeometry(QtCore.QRect(20, 20, 167, 301))
self.formGroupBox.setObjectName("formGroupBox")
self.formLayout = QtWidgets.QFormLayout(self.formGroupBox)
self.formLayout.setContentsMargins(10, 10, 10, 10)
self.formLayout.setSpacing(10)
self.formLayout.setObjectName("formLayout")
self.s1__lb_1 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_1.setObjectName("s1__lb_1")
self.formLayout.setWidget(0, QtWidgets.QFormLayout.LabelRole, self.s1__lb_1)
self.s1__box_1 = QtWidgets.QPushButton(self.formGroupBox)
self.s1__box_1.setAutoRepeatInterval(100)
self.s1__box_1.setDefault(True)
self.s1__box_1.setObjectName("s1__box_1")
self.formLayout.setWidget(0, QtWidgets.QFormLayout.FieldRole, self.s1__box_1)
self.s1__lb_2 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_2.setObjectName("s1__lb_2")
self.formLayout.setWidget(1, QtWidgets.QFormLayout.LabelRole, self.s1__lb_2)
self.s1__box_2 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_2.setObjectName("s1__box_2")
self.formLayout.setWidget(1, QtWidgets.QFormLayout.FieldRole, self.s1__box_2)
self.s1__lb_3 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_3.setObjectName("s1__lb_3")
self.formLayout.setWidget(3, QtWidgets.QFormLayout.LabelRole, self.s1__lb_3)
self.s1__box_3 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_3.setObjectName("s1__box_3")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.formLayout.setWidget(3, QtWidgets.QFormLayout.FieldRole, self.s1__box_3)
self.s1__lb_4 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_4.setObjectName("s1__lb_4")
self.formLayout.setWidget(4, QtWidgets.QFormLayout.LabelRole, self.s1__lb_4)
self.s1__box_4 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_4.setObjectName("s1__box_4")
self.s1__box_4.addItem("")
self.s1__box_4.addItem("")
self.s1__box_4.addItem("")
self.s1__box_4.addItem("")
self.formLayout.setWidget(4, QtWidgets.QFormLayout.FieldRole, self.s1__box_4)
self.s1__lb_5 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_5.setObjectName("s1__lb_5")
self.formLayout.setWidget(5, QtWidgets.QFormLayout.LabelRole, self.s1__lb_5)
self.s1__box_5 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_5.setObjectName("s1__box_5")
self.s1__box_5.addItem("")
self.formLayout.setWidget(5, QtWidgets.QFormLayout.FieldRole, self.s1__box_5)
self.open_button = QtWidgets.QPushButton(self.formGroupBox)
self.open_button.setObjectName("open_button")
self.formLayout.setWidget(7, QtWidgets.QFormLayout.SpanningRole, self.open_button)
self.close_button = QtWidgets.QPushButton(self.formGroupBox)
self.close_button.setObjectName("close_button")
self.formLayout.setWidget(8, QtWidgets.QFormLayout.SpanningRole, self.close_button)
self.s1__lb_6 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_6.setObjectName("s1__lb_6")
self.formLayout.setWidget(6, QtWidgets.QFormLayout.LabelRole, self.s1__lb_6)
self.s1__box_6 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_6.setObjectName("s1__box_6")
self.s1__box_6.addItem("")
self.formLayout.setWidget(6, QtWidgets.QFormLayout.FieldRole, self.s1__box_6)
self.state_label = QtWidgets.QLabel(self.formGroupBox)
self.state_label.setText("")
self.state_label.setTextFormat(QtCore.Qt.AutoText)
self.state_label.setScaledContents(True)
self.state_label.setAlignment(QtCore.Qt.AlignRight|QtCore.Qt.AlignTrailing|QtCore.Qt.AlignVCenter)
self.state_label.setObjectName("state_label")
self.formLayout.setWidget(2, QtWidgets.QFormLayout.SpanningRole, self.state_label)
self.verticalGroupBox = QtWidgets.QGroupBox(Form)
self.verticalGroupBox.setGeometry(QtCore.QRect(210, 20, 401, 241))
self.verticalGroupBox.setObjectName("verticalGroupBox")
self.verticalLayout = QtWidgets.QVBoxLayout(self.verticalGroupBox)
self.verticalLayout.setContentsMargins(10, 10, 10, 10)
self.verticalLayout.setObjectName("verticalLayout")
self.s2__receive_text = QtWidgets.QTextBrowser(self.verticalGroupBox)
self.s2__receive_text.setObjectName("s2__receive_text")
self.verticalLayout.addWidget(self.s2__receive_text)
self.verticalGroupBox_2 = QtWidgets.QGroupBox(Form)
self.verticalGroupBox_2.setGeometry(QtCore.QRect(210, 280, 401, 101))
self.verticalGroupBox_2.setObjectName("verticalGroupBox_2")
self.verticalLayout_2 = QtWidgets.QVBoxLayout(self.verticalGroupBox_2)
self.verticalLayout_2.setContentsMargins(10, 10, 10, 10)
self.verticalLayout_2.setObjectName("verticalLayout_2")
self.s3__send_text = QtWidgets.QTextEdit(self.verticalGroupBox_2)
self.s3__send_text.setObjectName("s3__send_text")
self.verticalLayout_2.addWidget(self.s3__send_text)
self.s3__send_button = QtWidgets.QPushButton(Form)
self.s3__send_button.setGeometry(QtCore.QRect(620, 310, 61, 31))
self.s3__send_button.setObjectName("s3__send_button")
self.s3__clear_button = QtWidgets.QPushButton(Form)
self.s3__clear_button.setGeometry(QtCore.QRect(620, 350, 61, 31))
self.s3__clear_button.setObjectName("s3__clear_button")
self.formGroupBox1 = QtWidgets.QGroupBox(Form)
self.formGroupBox1.setGeometry(QtCore.QRect(20, 340, 171, 101))
self.formGroupBox1.setObjectName("formGroupBox1")
self.formLayout_2 = QtWidgets.QFormLayout(self.formGroupBox1)
self.formLayout_2.setContentsMargins(10, 10, 10, 10)
self.formLayout_2.setSpacing(10)
self.formLayout_2.setObjectName("formLayout_2")
self.label = QtWidgets.QLabel(self.formGroupBox1)
self.label.setObjectName("label")
self.formLayout_2.setWidget(0, QtWidgets.QFormLayout.LabelRole, self.label)
self.label_2 = QtWidgets.QLabel(self.formGroupBox1)
self.label_2.setObjectName("label_2")
self.formLayout_2.setWidget(1, QtWidgets.QFormLayout.LabelRole, self.label_2)
self.lineEdit = QtWidgets.QLineEdit(self.formGroupBox1)
self.lineEdit.setObjectName("lineEdit")
self.formLayout_2.setWidget(0, QtWidgets.QFormLayout.FieldRole, self.lineEdit)
self.lineEdit_2 = QtWidgets.QLineEdit(self.formGroupBox1)
self.lineEdit_2.setObjectName("lineEdit_2")
self.formLayout_2.setWidget(1, QtWidgets.QFormLayout.FieldRole, self.lineEdit_2)
self.hex_send = QtWidgets.QCheckBox(Form)
self.hex_send.setGeometry(QtCore.QRect(620, 280, 71, 16))
self.hex_send.setObjectName("hex_send")
self.hex_receive = QtWidgets.QCheckBox(Form)
self.hex_receive.setGeometry(QtCore.QRect(620, 40, 71, 16))
self.hex_receive.setObjectName("hex_receive")
self.s2__clear_button = QtWidgets.QPushButton(Form)
self.s2__clear_button.setGeometry(QtCore.QRect(620, 80, 61, 31))
self.s2__clear_button.setObjectName("s2__clear_button")
self.timer_send_cb = QtWidgets.QCheckBox(Form)
self.timer_send_cb.setGeometry(QtCore.QRect(260, 390, 71, 16))
self.timer_send_cb.setObjectName("timer_send_cb")
self.lineEdit_3 = QtWidgets.QLineEdit(Form)
self.lineEdit_3.setGeometry(QtCore.QRect(350, 390, 61, 20))
self.lineEdit_3.setAlignment(QtCore.Qt.AlignRight|QtCore.Qt.AlignTrailing|QtCore.Qt.AlignVCenter)
self.lineEdit_3.setObjectName("lineEdit_3")
self.dw = QtWidgets.QLabel(Form)
self.dw.setGeometry(QtCore.QRect(420, 390, 54, 20))
self.dw.setObjectName("dw")
self.verticalGroupBox.raise_()
self.verticalGroupBox_2.raise_()
self.formGroupBox.raise_()
self.s3__send_button.raise_()
self.s3__clear_button.raise_()
self.formGroupBox.raise_()
self.hex_send.raise_()
self.hex_receive.raise_()
self.s2__clear_button.raise_()
self.timer_send_cb.raise_()
self.lineEdit_3.raise_()
self.dw.raise_()
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
def retranslateUi(self, Form):
_translate = QtCore.QCoreApplication.translate
Form.setWindowTitle(_translate("Form", "Form"))
self.formGroupBox.setTitle(_translate("Form", "串口设置"))
self.s1__lb_1.setText(_translate("Form", "串口检测："))
self.s1__box_1.setText(_translate("Form", "检测串口"))
self.s1__lb_2.setText(_translate("Form", "串口选择："))
self.s1__lb_3.setText(_translate("Form", "波特率："))
self.s1__box_3.setItemText(0, _translate("Form", "115200"))
self.s1__box_3.setItemText(1, _translate("Form", "2400"))
self.s1__box_3.setItemText(2, _translate("Form", "4800"))
self.s1__box_3.setItemText(3, _translate("Form", "9600"))
self.s1__box_3.setItemText(4, _translate("Form", "14400"))
self.s1__box_3.setItemText(5, _translate("Form", "19200"))
self.s1__box_3.setItemText(6, _translate("Form", "38400"))
self.s1__box_3.setItemText(7, _translate("Form", "57600"))
self.s1__box_3.setItemText(8, _translate("Form", "76800"))
self.s1__box_3.setItemText(9, _translate("Form", "12800"))
self.s1__box_3.setItemText(10, _translate("Form", "230400"))
self.s1__box_3.setItemText(11, _translate("Form", "460800"))
self.s1__lb_4.setText(_translate("Form", "数据位："))
self.s1__box_4.setItemText(0, _translate("Form", "8"))
self.s1__box_4.setItemText(1, _translate("Form", "7"))
self.s1__box_4.setItemText(2, _translate("Form", "6"))
self.s1__box_4.setItemText(3, _translate("Form", "5"))
self.s1__lb_5.setText(_translate("Form", "校验位："))
self.s1__box_5.setItemText(0, _translate("Form", "N"))
self.open_button.setText(_translate("Form", "打开串口"))
self.close_button.setText(_translate("Form", "关闭串口"))
self.s1__lb_6.setText(_translate("Form", "停止位："))
self.s1__box_6.setItemText(0, _translate("Form", "1"))
self.verticalGroupBox.setTitle(_translate("Form", "接受区"))
self.verticalGroupBox_2.setTitle(_translate("Form", "发送区"))
self.s3__send_text.setHtml(_translate("Form", "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
"p, li { white-space: pre-wrap; }\n"
"</style></head><body style=\" font-family:\'SimSun\'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">123456</p></body></html>"))
self.s3__send_button.setText(_translate("Form", "发送"))
self.s3__clear_button.setText(_translate("Form", "清除"))
self.formGroupBox1.setTitle(_translate("Form", "串口状态"))
self.label.setText(_translate("Form", "已接收："))
self.label_2.setText(_translate("Form", "已发送："))
self.hex_send.setText(_translate("Form", "Hex发送"))
self.hex_receive.setText(_translate("Form", "Hex接收"))
self.s2__clear_button.setText(_translate("Form", "清除"))
self.timer_send_cb.setText(_translate("Form", "定时发送"))
self.lineEdit_3.setText(_translate("Form", "1000"))
self.dw.setText(_translate("Form", "ms/次"))
以上这篇使用Python3+PyQT5+Pyserial 实现简单的串口工具方法就是小编分享给大家的全部内容了，希望能给大家一个参考，也希望大家多多支持。
DDR爱好者之家 Design By 杰米
广告合作：本站广告合作请联系QQ：858582 申请时备注：广告合作（否则不回）
免责声明：本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除！
免责声明：本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除！
DDR爱好者之家 Design By 杰米
暂无评论...
稳了！魔兽国服回归的3条重磅消息！官宣时间再确认！
昨天有一位朋友在大神群里分享，自己亚服账号被封号之后居然弹出了国服的封号信息对话框。
这里面让他访问的是一个国服的战网网址，com.cn和后面的zh都非常明白地表明这就是国服战网。
而他在复制这个网址并且进行登录之后，确实是网易的网址，也就是我们熟悉的停服之后国服发布的暴雪游戏产品运营到期开放退款的说明。这是一件比较奇怪的事情，因为以前都没有出现这样的情况，现在突然提示跳转到国服战网的网址，是不是说明了简体中文客户端已经开始进行更新了呢？
更新日志
2024年11月26日
2024年11月26日
- 凤飞飞《我们的主题曲》飞跃制作[正版原抓WAV+CUE]
- 刘嘉亮《亮情歌2》[WAV+CUE][1G]
- 红馆40·谭咏麟《歌者恋歌浓情30年演唱会》3CD[低速原抓WAV+CUE][1.8G]
- 刘纬武《睡眠宝宝竖琴童谣 吉卜力工作室 白噪音安抚》[320K/MP3][193.25MB]
- 【轻音乐】曼托凡尼乐团《精选辑》2CD.1998[FLAC+CUE整轨]
- 邝美云《心中有爱》1989年香港DMIJP版1MTO东芝首版[WAV+CUE]
- 群星《情叹-发烧女声DSD》天籁女声发烧碟[WAV+CUE]
- 刘纬武《睡眠宝宝竖琴童谣 吉卜力工作室 白噪音安抚》[FLAC/分轨][748.03MB]
- 理想混蛋《Origin Sessions》[320K/MP3][37.47MB]
- 公馆青少年《我其实一点都不酷》[320K/MP3][78.78MB]
- 群星《情叹-发烧男声DSD》最值得珍藏的完美男声[WAV+CUE]
- 群星《国韵飘香·贵妃醉酒HQCD黑胶王》2CD[WAV]
- 卫兰《DAUGHTER》【低速原抓WAV+CUE】
- 公馆青少年《我其实一点都不酷》[FLAC/分轨][398.22MB]
- ZWEI《迟暮的花 (Explicit)》[320K/MP3][57.16MB]